It is well known that Subaru engines are prone to excessive blow-by, creating a collection of oil and other contaminants in the intake system and intercooler. Do you ever see blue smoke in the rear view mirror? This is typically the contaminants getting burned through the combustion process.
Shown above is a Subaru valve cover vent crossover pipe that is almost completely clogged with oil residue and carbon build-up.Radium Engineering Solutions1. Dual Catch Can Kit
For street driven or lightly modified vehicles, a simple oil catch can system will often do the trick. Radium Engineering has utilized its compact catch cans to created an integrated package for installation into various 2002-2014 Subaru engine bays. The catch cans are designed to collect and retain the oil and other contaminants, preventing them from being cycled back through the engine's air intake and intercooler system. CLICK HERE
to learn more about the Radium Engineering catch cans.
The Subaru Dual Catch Can kit mounts on the RH stut tower and includes two catch cans. The forward catch can is plumbed in-line with the valve cover crankcase vents. This catch can filters and cleans the gasses before they are drawn into the intake pipe. It is responsible for keeping blow-by oil and other pollutants out of the turbo inlet pipe, turbocharger, and intercooler during high engine loads. The rear catch can intercepts the vacuum hose between the intake manifold and PCV valve. This catch can keeps oil and sludge out of the intake manifold. It functions when the engine is in vacuum and the PCV valve is open. The PCV system dynamically changes depending on the throttle body position. See below:
As shown above, when the throttle is closed, the one-way PCV "check" valve opens.
When the throttle is open, the PCV valve closes and all the crank venting is happening through the valve cover vents. The air being sucked in by the turbocharger helps create negative pressure in the intake pipe, which then results in a mild vacuum to the crankcase vent catch can, to help draw out the gasses. In all engine load scenarios, the PCV system promotes negative pressure in the crankcase that can extend engine life.
With the kit mounted in the area of the turbocharger, protection from heat is accomplished with a modular heat shield (shown above). This is necessary to keep the temperature of the catch cans down and help promote condensation of water vapor inside the catch cans where it is collected along with oil and unburnt fuel. The catch cans should be periodically checked using the dipsticks and drained as needed. To dispose the fluid, simply remove the 4 heat shield mounting bolts with a 3mm Allen wrench. The lower half of the catch can bodies unscrew for easy servicing. Always properly dispose of the contaminants. Do not pour catch can contents back into the engine oil.
Click here for the Subaru Dual Catch Can Kit product page2. Air Oil Separator (AOS) Kit
With a higher engine power output comes an increase in oil circulating through the crankcase ventilation system. Horizontally opposed engines, in particular, expel an excessive amount of oil through the ventilation system. In extreme cases, this may overwhelm the capacity of the standard sized catch cans during long track sessions. Instead of using a large reservoir to retain all the collected contaminants, the oil can be returned to the pan. However, this process must take into account several considerations in order to function properly.
Shown above is the Radium Engineering Air Oil Separator (AOS). The AOS is built on the foundation of the Radium Competition Catch Can
, but with a new specifically designed bottom plate. Full CNC construction, sealed with O-rings and anodized. The AOS still features all of the same oil baffling media found in the competition catch cans. However, instead of collecting oil, the AOS drains back to the engine through the large baffled -10AN ORB bottom port, shown above.
The bottom plate not only features a large oil return port, it also functions as a heater to prevent water from condensing inside the can. The heater is fed by coolant circulating to/from the engine. The cooling fins, shown above, increase the effective surface area of the heating element. Also, if any water were to make it's way into the canister, it would be trapped underneath the lower density oil in the bottom trench. The center port baffle provides a layer of protection to keep debris from enterning the crankcase.
For AOS crankcase plumbing, the valve cover vents are routed into the top inlet where the stainless steel condensing material separates the oil from the gasses. The PCV valve is removed and the system is no longer hooked up to the intake manifold (vacuum). The crankcase port in the center of the block (green arrows) is now routed directly to the AOS bottom port with a large diameter -12AN (3/4" ID) hose. The filtered liquid oil is collected at the bottom of the AOS and is drawn into the oil pan through the 3/4" hose. Meanwhile, the clean crankcase air can either be vented to atmosphere (VTA) or recirculated to the turbo air inlet pipe (see instructions for details) out of the side port of the AOS.
The AOS completely disassembles for easy servicing when needed, as shown above.
Because of limited vertical clearance, special low-profile banjo style fittings were developed for the Subaru AOS kit. These fittings are super compact, yet high flowing. They are machined from aluminum and anodized.
Radium installation kits include all necessary parts for an easy bolt-in process.
Shown above is the AOS system fully assembled with a Subaru specific mounting bracket and fittings.
When installed, the valve cover vent lines "Y" together and are plumbed into the top port of the AOS can. The side port is used as the vent to atmosphere (VTA), or it can be routed to the turbo inlet pipe for a closed system. The bottom port of the AOS can is plumbed with a 3/4" hose to the crankcase vent port on top of the block. This line acts as a way for crankcase gasses to enter the AOS, but also functions as the path for oil to return back to the oil pan. Click here for the Subaru AOS Kit product pageBoth Dual Catch Can and AOS kits are available for the Subaru WRX, WRX STi and Forester XT in the 2002-2014 model year range.
with any questions.