Description
OVERVIEW
Hardware for installing a Radium Engineering Multi-Port Fuel Pressure Regulator in specific Chevrolet Corvettes. These mounts secure to the 2 OEM brake master cylinder studs.
width=
It locates the Multi-Port Fuel Pressure Regulator (not included) to the inner side near the engine.

NOTES
1. These mounts are specific to a Multi-Port Fuel Pressure Regulator.
2. Aftermarket fuel lines and fittings (as shown below) will need to be configured separately.
width=
13-0447 COMPATIBILITY
97-08 Chevrolet Corvette (M/T and A/T Transmissions)

This FPR mount features two vertical M6x1mm threaded holes 1.125" apart. For securing the regulator, the M6x1mm bolts provided with MPR-RA can be used.
width=
INCLUDES
Anodized Billet Aluminum Mount (x1)
><br> <hr> <hr> <span style=
13-0457 COMPATIBILITY
09-13 Chevrolet Corvette (M/T and A/T Transmissions)

This FPR mount features two vertical M6x1mm threaded holes 1.125' apart. For securing the regulator, the M6x1mm bolts provided with MPR-RA can be used.

INCLUDES
Anodized Billet Aluminum Mount (x1)
><br> <hr> <hr> <span style=
13-1467 COMPATIBILITY
14-19 Chevrolet Corvette (M/T and A/T Transmissions)
width=
This FPR mount features two vertical 6.5mm holes 1.125" apart. For securing the regulator, the M6x1mm bolts and nuts provided with MPR-RA can be used.

INCLUDES
Anodized Aluminum Sheet Metal Mount (x1)
width=

Fuel Pressure Regulator Mounts, Corvette

$0.00
Shipping calculated at checkout.

Install Instructions PDFs

Installation Instructions (PDF)