This EFI Fuel hose is found in Radium Engineering fuel systems (starting late 2024). Unlike heater hose, EFI fuel hose resists engine oil, gasoline, diesel fuel, ethanol fuel (including E85), etc. And unlike PCV hose, EFI fuel hose uses an internal PA liner that protects from fuel permeation and has a higher temperature tolerance.
NOTE: EFI fuel hose should not be used for all applications.
-For submersible fuel hose, go HERE.
-For submersible PTFE fuel tubing, go HERE.
The illustration above is for information purposes only. Available in black with white lettering ONLY.
CONSTRUCTION
Tube Material: Black Chemigum (NBR)
Reinforcement: 1-Layer Aramid Fiber Braid
Cover: Black Chloroprene Neoprene
Temperature Range: -40F to 302F
5/16" EFI Fuel Hose
Inside Diameter: 0.31" ID
Outside Diameter: 0.58" OD
Working Pressure: 400-psi
Burst Pressure: 1600-psi
Vacuum: 24-inHg
3/8" EFI Fuel Hose
Inside Diameter: 0.38" ID
Outside Diameter: 0.65" OD
Working Pressure: 400-psi
Burst Pressure: 1600-psi
Vacuum: 24-inHg
1/2" EFI Fuel Hose
Inside Diameter: 0.50" ID
Outside Diameter: 0.80" OD
Working Pressure: 400-psi
Burst Pressure: 1600-psi
Vacuum: 24-inHg
HOW TO ORDER
First select the hose I.D. that you need from the radio buttons. Next, enter the amount of "feet" required in the Quantity box. Round to the nearest foot (decimals not allowed). Units Conversion: 1ft = 305mm
Note: Please allow +/- 2"(50 mm) tolerance. Order excess length if exact cut length is critical.
Examples
Quantity: 1, Radium Engineering will provide 1 foot of hose in the size selected.
Quantity: 6, Radium Engineering will provide 6 continuous feet of hose in the size selected.
NOTE: HOSE IS NOT ELIGIBLE FOR EXCHANGE OR RETURN