Click here to download installation instructions (PDF)
OVERVIEW
Hardware for installing a Radium Engineering
Multi-Port Fuel Pressure Regulator in specific Chevrolet Corvettes. These mounts secure to the 2 OEM brake master cylinder studs.
It locates the
Multi-Port Fuel Pressure Regulator (not included) to the inner side near the engine.
NOTES1. These mounts are specific to a
Multi-Port Fuel Pressure Regulator.
2. Aftermarket fuel lines and fittings (as shown below) will need to be configured separately.
13-0447 COMPATIBILITY97-08 Chevrolet Corvette (M/T and A/T Transmissions)
This FPR mount features two vertical M6x1mm threaded holes 1.125" apart. For securing the regulator, the M6x1mm bolts provided with
MPR-RA can be used.
INCLUDESAnodized Billet Aluminum Mount (x1)
13-0457 COMPATIBILITY09-13 Chevrolet Corvette (M/T and A/T Transmissions)
This FPR mount features two vertical M6x1mm threaded holes 1.125" apart. For securing the regulator, the M6x1mm bolts provided with
MPR-RA can be used.
INCLUDESAnodized Billet Aluminum Mount (x1)
COMING SUMMER 2024....COMPATIBILITY14-19 Chevrolet Corvette (M/T and A/T Transmissions)
This FPR mount features two vertical 6.5mm holes 1.125" apart. For securing the regulator, the M6x1mm bolts and nuts provided with
MPR-RA can be used.
INCLUDESAnodized Aluminum Sheet Metal Mount (x1)