Our Price: $4.49
Size Selection
I have read and understand the Terms and Conditions


Vapor shield hose is designed specifically for high performance fuel injection systems. Unlike standard fuel hose that degrades with alternate fuels, this hose is resistant and compatible with gasoline, diesel, biodiesel, 100% methanol, and all ethanol blends including E85. Furthermore, the hose has a thermoplastic armor layer that guards against unwanted vapor permeation fuel odor. And unlike PTFE, this fuel hose has an improved bend radius, as specified below.  
For compatible hose-ends CLICK HERE

This hose is compatible with barbed fittings fastened with hose clamps. Meets EPA and CARB requirements. For in-tank submersible fuel hose go HERE.

Tube: Hydrogenated Nitrile Butadiene Rubber (HNBR) 
Vapor Barrier: Thermoplastic
Reinforcement: Aramid Fiber
Cover: Black Chlorinated Polyethylene
Temperature Range: -40F to 275F
Standards: SAE 30R14 Type 2, CARB, EPA
Made in USA 

5/16" Vapor Shield Hose, 5AN
Inside Diameter: 0.3125" (7.9mm) ID
Outside Diameter: 0.56" (14.3mm) OD
Working Pressure: 225-psi maximum
Burst Pressure: 1,125-psi mimimum
Bend Radius: 2.95" minimum

1/2" Vapor Shield Hose, 8AN
Inside Diameter: 0.500" (12.7mm) ID
Outside Diameter: 0.75" (15.9mm) OD
Working Pressure: 225-psi maximum
Burst Pressure: 1,125-psi mimimum
Bend Radius: 4.35" minimum


First select the hose I.D. that you need from the radio buttons. Next, enter the amount of feet you want in the Quantity box. You must round to the nearest foot (decimals not allowed).
Units Conversion: 1ft = 12in = 30.5cm = 305mm

Quantity: 1, Radium will provide 1 foot of hose in the size you have selected.
Quantity: 6, Radium will provide 6 feet of hose in the size you have selected. 


Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category