Fuel/PCV Rubber Hose

This Radium Engineering Fuel/PCV hose is found in both our crankcase ventilation oil catch can systems and high pressure fuel injection applications. Unlike heater hose, fuel/PCV hose resists engine oil, gasoline, diesel fuel, ethanol fuel (including E85), etc.

NOTE: Fuel/PCV hose should not be used for all applications.
-For submersible fuel hose, go HERE.
-For submersible PTFE fuel tubing, go HERE.
 
The illustration above is for information purposes only. Available in black ONLY.

CONSTRUCTION

Tube Material: Black Chemigum (NBR)
Reinforcement: 1-Layer Polyester Fiber Braid
Cover: Black Neoprene and Buna-N
Temperature Range: -40F to 257F

1/4" PCV/Fuel Hose
Inside Diameter: 0.25" ID
Outside Diameter: 0.53" OD
Working Pressure: 225-psi
Vacuum: 24-inHg

5/16" PCV/Fuel Hose
Inside Diameter: 0.31" ID
Outside Diameter: 0.58" OD
Working Pressure: 225-psi
Vacuum: 24-inHg 

3/8" PCV/Fuel Hose
Inside Diameter: 0.38" ID
Outside Diameter: 0.65" OD
Working Pressure: 225-psi
Vacuum: 24-inHg 

1/2" PCV/Fuel Hose
Inside Diameter: 0.50" ID
Outside Diameter: 0.80" OD
Working Pressure: 150-psi
Vacuum: 24-inHg

5/8" PCV/Fuel Hose
Inside Diameter: 0.63" ID
Outside Diameter: 0.95" OD
Working Pressure: 150-psi
Vacuum: 24-inHg

3/4" PCV/Fuel Hose
Inside Diameter: 0.75" ID
Outside Diameter: 1.17" OD
Working Pressure: 150-psi
Vacuum: 24-inHg 

HOW TO ORDER

First select the hose I.D. that you need from the radio buttons. Next, enter the amount of feet you want in the Quantity box. You must round to the nearest foot (decimals not allowed).
Units Conversion: 1ft = 305mm
Note: Radium does it's best to cut the hose at the length ordered. However please allow +/- 2"(50 mm) tolerance. Order excess length if exact cut length is critical.

Examples 
Quantity: 1, Radium Engineering will provide 1 foot of hose in the size you have selected.
Quantity: 6, Radium Engineering will provide 6 feet of hose in the size you have selected.