COMPATIBILITY

11-14 Ford Mustang GT
15-23 Ford Mustang GT
2024+ Ford Mustang GT
15-20 Ford Shelby GT350
14-16 Ford Falcon FG-X
2011+ Ford F-Series

Also compatible with the Ford Racing Boss 302 Manifold

FUEL INJECTORS

There are two type of fuel rails made by Radium: upgrade rails and top feed conversion rails. Upgrade rails only upgrade the rail and the OEM fuel injectors can be reused. If an upgrade to the injectors is desired, they must be equivalent to the OEM injector, meaning they must be the same height and the upper & lower O-rings must match the OEM diameters and styles. Top feed conversion rails are used to convert a vehicle that has side feed (or sometimes air-assist) injectors over to a top feed injector.

This fuel rail is an upgrade rail. OEM or OEM equivalent injectors must be used.

Radium does not make fuel injector recommendations.

Consult your tuner for injector brand or flow rate recommendations.
Consult the injector manufacturer for a part number that has the correct dimensions.

OVERVIEW

20-1433 Ford Coyote/Voodoo Fuel Rails

Manufactured with large internal bores, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish. Like the OEM fuel rails, the injector bores are 14mm ID so factory injectors are permitted. There are provisions for the retaining clips for proper indexing of all OEM fuel injectors. There are 2 sets of fuel rail mounting feet that cover all Ford Coyote intake manifolds.

The fuel rail ports are tapped for 8AN ORB and 1/8 NPT. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.

8AN ORB Adapter Fittings can be found HERE
8AN ORB Direct Mount Regulators can be found HERE
8AN ORB Fuel Pulse Dampers can be found HERE
1/8 NPT Adapter Fittings can be found HERE
Fuel Pressure Gauge Adapters can be found HERE

NOTES

Unless 20-1433-PK is purchased, P/N: 14-0358 is required to adapt the OEM direct injection pump feed hose.
Unless 20-1433-PK is purchased, P/N: 14-0359 is required to adapt the OEM fuel sensor.

20-1433-PK Fuel Rail Plumbing Kit Ford Coyote/Voodoo

The fuel rail plumbing kit allows for an OEM bolt-on affair. Nothing else is required to fully replace the OEM fuel rail system. All OEM fuel hoses and sensors (if applicable) are reused. Some parts will not be used. The 8AN crossover is manufactured from high quality PTFE hose compatible will all fuel types including E85. Plugs are included for all unused ports.

NOTES

Not compatible with 2024+ Ford Mustang Coyote (S650).
A pressure sensor adapter and mechanical pump feed adapter are included specifically for the 2018+ direct injected Coyote engines.
For the 11-17 Coyote engines, the provided 1/8" NPT plugs will be used instead.