Click here to download installation instructions (PDF)
The Radium Engineering fuel cell fill kits can be used on any cell that uses a 6-bolt 2.18" (55mm) bolt circle mounting flange. This bolt pattern is used on all Radium Engineering Fuel Cell Surge Tanks. Screw threads are the industry standard 1/4"-28.See this blog article for more information on fuel cell filling.
20-0197-V Direct Mount Fill Neck and Cap
The 20-0197-V Direct Mount Fill Neck and Cap is perfect for filling directly into the fuel cell, as shown.This kit uses the 20-0148-V Fill Neck Cap (included) so filling is quick and simple.Included:-Machined and Anodized Aluminum Fill Neck-Anodized and Laser Etched Aluminum Cap-FKM Gasket Flange Seal-FKM O-ring Cap Seal-Stainless Steel Hardware
20-0495-V Dry Break, 1.5in, Female, Direct Mount, VentedDesigned for direct mounting onto a fuel cell. For mating, a 6-bolt flange with a 2.18" PCD bolt circle (as found on the FCST) is required. Includes 20-0549-V Dry Break, 1.5in, Female, Vented as well as an aluminum housing, stainless steel hardware, and a gasket. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).Specifications:Height: 3.43" (Dry Break to Gasket)Mate: 20-0496 Dry Break, 1.5in, Male
20-0148-V Fill Neck Cap OnlyThis is replacement fill neck cap. Compatible with Radium Engineering 20-0197-V.Included: -Vented Fuel Fill Cap-Roll Over Protection-FKM O-ring -Tether Hardware
20-0360 Fill Neck Block-Off KitThis blocks-off the filler hole on the Radium FCST units.Included:-Anodized 1/8" (3mm) Aluminum Plate-FKM Gasket Flange Seal-Stainless Steel Hardware
18-0019 Gasket, 6-Bolt Fill Neck, 2.18" BCThis gasket is used for Radium fuel cell fill necks. The 1/16" thick material is a premium quality variation of FKM. It uses 6 equally-spaced holes with a 2.18" bolt center.